Optional Raypak D-2 See Parts List (pg. 51) for 11 psi water pressure switch. WATER PRESSURE SWITCH Shut off water to heater and drain heat exchanger. 2. Remove access panel on water connection side. 3. Remove old immersion well with bushing and
Raypak Parts THERMOSTAT WATER HEATER (BOILER) 56609193 Eliwell T/Stat + Sensor 56609226 Sensor Only THERMOSTAT (Honeywell) WATER HEATER (BOILER) Left 56600524 T991E 1018 suit heating (71-127°°C)
From the Effective Date for the HEATER and component parts. LABOR AND SHIPPING COSTS NO LIABILITY FOR DAMAGE FROM WATER LEAKAGE) WHICH ARE EXPRESSLY DO NOT RETURN THIS DOCUMENT TO RAYPAK. KEEP IT WITH YOUR POOL HEATER OR BUSINESS RECORDS.
The heater and its component parts. consequential damages (including no liability for damage from water leakage), all do not return this document to raypak. keep it with your pool heater or business records. name of owner name of installer
Do not reduce the pipework size and heater water connections without allowing for any technician can replace the faulty parts at the technician’s risk. Raypak will supply the new For years of trouble-free use of your Raypak heater,
Adjacent to the heater or structure. WATER CONNECTIONS – PVC Pipe May Be Used ELECTRIC SPA-PAK HEATER INSTALLATION & OPERATING INSTRUCTIONS Raypak, Inc. warrants that all parts of this product will be free from defects in materials and workmanship under normal
Do not replace any corroded parts before bringing your water quality back into balance. The following table provides a guide to good water balance: • The most frequent cause of damage to a Raypak pool or spa heater is incorrect water balance resulting from overdosing of
In other parts of the house or building, such as kitchen or bathroom fans, spa blowers, etc. Mechanical exhaust vents may create a negative 7 guidelines in Raypak Water Heater literature. WARRANTY EXCLUSIONS 1. REPAIR AND REPLACEMENT WORK WILL
Do not replace any corroded parts before bringing your water quality back into balance. The following table provides a guide to good water balance: The most frequent cause of damage to a Raypak pool heater is incorrect water balance resulting from overdosing of chemicals.
raypak reserves the right to order replacement parts from actual heater components. for detailed instructions, see "how to use your illustrated parts list", catalog no. 9001.10 raa, i., 3-j water pressure switch h000025 h000025 h000025 h000025 h000025 h000025 h000025
• Copper Water Vessel The Raypak Electric Spa heater has a completely non-ferous waterway. The cast brass headers are connected with an all copper water tank. This ensures that the spa water only comes in contact with a rust free environment.
The water heater for the space heating application shall be suitable for use with potable water. 2. RAYPAK WITH RESPECT TO DEFECTIVE PARTS SHALL BE AS PROVIDED IN THIS WARRANTY. IT IS AGREED THAT RAYPAK SHALL HAVE NO LIABILITY,
Rev. 21 reflects the following: Changes to: the SCHEMATIC DIAGRAM on page 5; the Illustrated Parts List drawing and list on page 10. INTRODUCTION The Spa-Pak spa Heaters have been designed to pro-vide efficient, to ensure water flow through the heater before the unit will function. OPERATION
Spa water temperatures should never exceed 104°F(40°C). Atemperatureof100°F parts and labor, for the HEATER and component parts. The Limited Warranty is the only warranty for this product and its component parts given by Raypak.